Mitsubishi GOT2000 Series Connection Manual

5. ETHERNET CONNECTION
5.1 Connectable Model List
5 - 5
5
ETHERNET CONNECTION
*1 The supported version of the main units varies depending on the Ethernet module to be used as shown below.
*2 Ethernet connections can be established only via the Ethernet module (QJ71E71) or the built-in Ethernet port of QnUDE.
Series Model name Clock Communication type Connectable model Refer to
Motion
controller
CPU
(A Series)
A273UCPU
Ethernet
5.2.1
A273UHCPU
A273UHCPU-S3
A373UCPU
A373UCPU-S3
A171SCPU
A171SCPU-S3
A171SCPU-S3N
A171SHCPU
A171SHCPUN
A172SHCPU
A172SHCPUN
A173UHCPU
A173UHCPU-S1
MELSEC-WS
WS0-CPU0
- -
WS0-CPU1
MELSECNET/H
Remote I/O
station
QJ72LP25-25
Ethernet
5.2.1
QJ72LP25G
QJ72BR15
CC-Link IE
Field Network
head module
LJ72GF15-T2 - -
CC-Link IE
Field Network
Ethernet
adapter module
NZ2GF-ETB
CC-Link IE
5.2.4
Ethernet
CNC C70 Q173NCCPU Ethernet
5.2.3
Robot
controller
CRnQ-700
(Q172DRCPU)
CR750-Q
(Q172DRCPU)
CR751-Q
(Q172DRCPU)
Ethernet
*2
5.2.1
MELSEC-FX
FX
0
- -
FX
0S
FX0N
FX1
FX2
FX2C
FX1S
FX1N
FX2N
FX1NC
FX2NC
FX3S
*1
Ethernet
5.2.1
FX
3G
*1
FX3GC
*1
FX3GE
FX3U
*1
FX3UC
*1
Ethernet module FX3U(C) FX3G(C) FX3S
FX3U-ENET-L Ver. 2.21 or later FX3U-ENET-L is not supported.
FX
3U-ENET-ADP Ver. 3.10 or later Ver. 2.00 or later Ver. 1.00 or later

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive