EasyManua.ls Logo

Mitsubishi GOT2000 Series - GOT Side Settings; Setting Communication Interface (Communication Settings)

Mitsubishi GOT2000 Series
674 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14. INVERTER CONNECTION
14.4 GOT Side Settings
14 - 21
INVERTER CONNECTION
14
14.4 GOT Side Settings
14.4.1 Setting communication
interface (Communication
settings)
Set the channel of the connected
equipment.
1. Select [Common] [Controller Setting] from the
menu.
2. The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3. Set the following items.
Manufacturer: Mitsubishi
Controller Type: Set according to the Controller
Type to be connected.
I/F: Interface to be used
Driver:
<When connecting the GOT to one or more
FREQROL 500/700/800 series and sensorless
servos>
[FREQROL 500/700/800, SENSORLESS SERVO]
<When connecting the GOT to one or more
FREQROL 800 series>
[FREQROL 800]
<When automatically connecting the GOT to
FREQROL 800 series, or using the PLC function of
the RFREQROL 800 series>
[FREQROL 800]
4. The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
14.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINTPOINTPOINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting
2.
3.
4.
Click!

Table of Contents

Other manuals for Mitsubishi GOT2000 Series

Related product manuals