Mitsubishi GOT2000 Series Connection Manual

15. SERVO AMPLIFIER CONNECTION
15.2 System Configuration
15 - 5
SERVO AMPLIFIER CONNECTION
15
15.2.3 Connecting to the MELSERVO-J4, J3 Series
 When connecting to one servo amplifier
*1 Connect the connector of the servo amplifier to CN3.
*2 DSV-CABV is a product manufactured by Diatrend Corporation. For details, contact Diatrend Corporation.
*3 FA-T-RS40VS is a product manufactured by MITSUBISHI ELECTRIC ENGINEERING COMPANY LIMITED. For details, contact
MITSUBISHI ELECTRIC ENGINEERING COMPANY LIMITED.
The cables (RS-PCATCBL-0.5M(0.5m), RS-422SCBL-2M(2m)) are packed together.
Use the provided cables to connect devices.
RS-422/232
converter
GOT
Connection cable
Servo
amplifier
Communication driver
MELSERVO-J4, J3, J2S/M, JE
Servo amplifier Connection cable GOT
Number of
connectable
equipment
Series name
RS-422/232 interface
converter
RS-422/232 conversion
cable
Commun
ication
type
Cable model
Connection diagram
number
Max.
distance
Option device Model
MELSERVO-
J4
*1
, J3
*1
DSV-CABV(1.5m)
*2
or
FA-T-RS40VS
*3
RS-232 - 15m
- (Built into GOT)
1 GOT for
1 servo amplifier
GT15-RS2-9P
- RS-422
RS422 connection
diagram 2)
30m
- (Built into GOT)
GT15-RS4-9S

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive