Mitsubishi GOT2000 Series Connection Manual

19 - 4
19. MULTI-CHANNEL FUNCTION
19.2 System Configuration
19.2 System Configuration
19.2.1 Bus connection and serial connection
One GOT can monitor a PLC CPU, temperature controller and servo amplifier, etc. Therefore, the system configuration,
in which several controllers are mixed, can be easily established.
In addition, each system can be monitored on the GOT screen, and the unified management of the information is
possible.
Communication driver
Bus(Q)
OMRON SYSMAC
Communication driver
OMRON THERMAC
/INPANEL NEO
Communication driver
Communication driver
MELSERVO-J3, J2S/M
Bus connection
(Channel No.1)
Direct CPU
connection
(Channel No.2)
Temperature
controller
connection
(Channel No.3)
Servo amplifier connection
(Channel No.4)
Connection cable
QCPU
Connection cable
Connection cable
Connection cable
OMRON
PLC
OMRON
temperature
controller
MELSERVO-
J2-Super
series
GOT
PLC
Connection
type
Connection cable
GOT Number of
connectable
equipment
Channel No. Option device Model
MELSEC-Q
Bus
connection
For the system configuration between
GOT and the controllers, refer to the
following.
Each chapter indicating the
system configuration
1 GT15-QBUS
4 connected
equipment for 1
GOT
(4 channels)
OMRON PLC
Direct CPU
connection
2 - (Built into GOT)
OMRON temperature controller 3 GT15-RS2-9P
MELSERVO-J2-Super 4 GT15-RS4-9S
OMRON PLC
Direct CPU
connection
For the system configuration between
GOT and the controllers, refer to the
following.
Each chapter indicating the
system configuration
1
- (Built into GOT)
2 connected
equipment for 1
GOT
(2 channels)
OMRON temperature controller 2

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive