19. MULTI-CHANNEL FUNCTION
19.2 System Configuration
19 - 5
19
MULTI-CHANNEL FUNCTION
Controllers that use Channels No.5 to 8
The following shows the drivers that can be set to Channels No. 5 to 8.
For the system configuration and connection condition with the controller, refer to the chapter of each controller.
*1 Only one channel can be assigned to one driver.
Channel No.
Driver
*1
Reference
5 to 7
Barcode Reader, RFID Controller,
PC Remote Operation (Serial)
GOT1000 Series Connection Manual (Microcomputer, MODBUS,
Products, Peripherals)
BAR CODE READER CONNECTION
PC REMOTE CONNECTION
RFID CONNECTION
8
Barcode Reader, RFID Controller,
PC Remote Operation (Serial)
To Next Page
Loading...
