Mitsubishi GOT2000 Series Connection Manual

20 - 54
20. FA TRANSPARENT FUNCTION
20.6 Personal Computer Side Setting
20.6.7 Accessing the servo amplifier
by the MR Configurator
Make the FA transparent settings with the of MT
Developer.
For details, refer to the following:
20.6.5 Accessing by the MT Developer
20.6.8 Accessing the servo amplifier
by the MR Configurator2
Make the FA transparent settings with the of MT Works2.
For details, refer to the following:
20.6.6 Accessing by the MT Works2
20.6.9 Accessing the inverter by the
FR Configurator
This section explains the setting method of the FA
transparent function of FR Configurator with an example of
connecting to FREQROL A700/F700 series.
1. Click [Settings] [Communication Settings...] in FR
Configurator.
2. Select [USB] in [Communication Port].
3. Click the [GOT Transparent Communication].
4. Click the [OK].
5. Click [OFFLINE] to make it [ONLINE].
6. Click the [System Read], then check if GOT has been
connected to FREQROL A700/F700 series normally.

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive