Name: Mitsubishi GOT2000 Series
Brand: Mitsubishi
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1. PREPARATORY PROCEDURES FOR MONITORING

1.5 Verifying GOT Recognizes Connected Equipment

1 - 23

PREPARATORY PROCEDURES FOR MONITORING

1.5 Verifying GOT Recognizes Connected Equipment

Verify the GOT recognizes controllers on [Communication Settings] of the Utility.

• Channel number of communication interface, communication drivers allocation status

• Communication unit installation status

For details on the Utility, refer to the following manual.

GOT2000 Series User's Manual (Utility)

1. After powering up the GOT, touch [GOT basic

set] [Controller] from the Utility.

2. The [Communication Settings] appears.

3. Verify that the communication driver name to

be used is displayed in the communication

interface box to be used.

4. When the communication driver name is not

displayed normally, carry out the following

procedure again.

1.1Setting the Communication Interface

3. 4.

Other manuals for Mitsubishi GOT2000 Series

Questions and Answers:

Need help?

Do you have a question about the Mitsubishi GOT2000 Series and is the answer not in the manual?

General