8 - 2
8. BUS CONNECTION
8.1 Connectable Model List
8. BUS CONNECTION
8.1 Connectable Model List
The following table shows the connectable models.
(Continued to next page)
*1 When using the bus extension connector box, attach it to the extension base unit. (Connecting it to the main base unit is not allowed.)
*2 For the multiple CPU system configuration, use CPU function version B or later.
*3 Use a module with the upper five digits later than 12042.
*4 When a slim base is used, a bus connection cannot be established.
Series Model name Clock
Communication type
Connectable model Refer to
MELSEC-Q
(Q mode)
*4
Q00JCPU
*1
Bus connection
8.2.1
Q00CPU
*2
Q01CPU
*2
Q02CPU
*2
Q02HCPU
*2
Q06HCPU
*2
Q12HCPU
*2
Q25HCPU
*2
Q02PHCPU
Q06PHCPU
Q12PHCPU
Q25PHCPU
Q12PRHCPU (Main base)
- -
Q25PRHCPU (Main base)
Q12PRHCPU (Extension base)
Q25PRHCPU (Extension base)
Q00UJCPU
*1
Bus connection
8.2.1
Q00UCPU
Q01UCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Q03UDVCPU
Q04UDVCPU
Q06UDVCPU
Q13UDVCPU
Q26UDVCPU
C Controller
module
Q12DCCPU-V
*3
Q24DHCCPU-V
Q24DHCCPU-LS
Bus connection
8.2.1
MELSEC-QS QS001CPU - -