9 - 6
9. MELSECNET/H CONNECTION (PLC TO PLC NETWORK), MELSECNET/10 CONNECTION (PLC TO
PLC NETWORK)
*1 When using SV13, SV22, or SV43, use the motion controller CPU on which any of the following main OS version is installed.
• SW6RN-SV13Q : 00H or later
• SW6RN-SV22Q : 00H or later
• SW6RN-SV43Q : 00B or later
*2 Use main modules with the following product numbers.
• Q172CPU: Product number N******* or later
• Q173CPU: Product number M******* or later
*3 Only the first step can be used on the extension base unit (Q52B/Q55B).
*4 The extension base unit (Q5 B/Q6 B) can be used.
To Next Page
Loading...
