10. CC-Link IE CONTROLLER NETWORK CONNECTION
10.3 GOT side settings
10 - 11
CC-Link IE CONTROLLER NETWORK CONNECTION
10
(b) When the settings of Transfer network No.,
Relay network No. or Relay station No. are
reflected to the parameter from the MELSOFT
Navigator, those settings are added. Items set
in advance are not deleted.However, if the
target network No. overlaps, the item set in
advance is overwritten.
(c) The routing information is used manually by
the user when the data is created. Therefore,
after changing the network configuration by
MELSOFT Navigator, create a routing
information again. For details of the creation
of the routing information, refer to the
MELSOFT Navigator help.
To Next Page
Loading...
