14 - 32
14. INVERTER CONNECTION
14.5 FREQROL Series Inverter Side Settings
Automatic setting with Pr.999 (FREQROL-F700P series only)
If Pr.999 is set as the following, the communication settings other than [PU communication station number] and
[Communication EEPROM write selection] can be automatically set in a batch to the default communication
settings of the GOT side.
*1 When monitoring the value of Pr.999, 9999 is always monitored.
Parameter No. Set value Description
Operation in parameter setting mode
Pr.999
*1
10 GOT Initial settings (PU connector) [AUTO][GOT][1]Write
11
GOTInitial settings
(RS-485 terminal)
-
To Next Page
Loading...
