Mitsubishi GOT2000 Series Connection Manual

14 - 38
14. INVERTER CONNECTION
14.5 FREQROL Series Inverter Side Settings
(c) Pr.999=12
*1 Before configuring the automatic batch setting, if Pr.414 is set to 1, the setting is not changed.
(d) Pr.999=13
*1 Before configuring the automatic batch setting, if Pr.414 is set to 1, the setting is not changed.
Pr.No. Setting item Set value
79 Operation mode selection 1
118 PU communication speed 1152
119 PU communication stop bit length 0
120 PU communication parity check 1
121 Number of PU communication retries 9999
122 PU communication check time interval 9999
123 PU communication waiting time setting 0ms
124 PU communication CR/LF selection 1
340 Communication startup mode selection 0
414 PLC function operation selection
2
*1
Pr.No. Setting item Set value
79 Operation mode selection 0
332 RS-485 communication speed 1152
333 RS-485 communication stop bit length 0
334 RS-485 communication parity check 1
335 RS-485 communication retry count 9999
336 RS-485 communication check time interval 9999
337 RS-485 communication waiting time setting 0ms
340 Communication startup mode selection 1
341 RS-485 communication CR/LF selection 1
414 PLC function operation selection
2
*1
549 Protocol selection 0

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive