Mitsubishi GOT2000 Series Connection Manual

20 - 12
20. FA TRANSPARENT FUNCTION
20.3 List of Models that Can Be Monitored
(Continued to next page)
*1 Use the serial port of QCPU in the multiple CPU system since Q173NCCPU has no direct coupled I/F.
*2 Connect to the DISPLAY I/F of Q173NCCPU.
*3 Use the serial port of QCPU in the multiple CPU system, since CRnQ-700 has no direct coupled I/F.
Series Model name Target software
Connection type
Bus connection
Direct CPU
connection
Computer link
connection
Ethernet
connection
MELSEC-WS
WS0-CPU0
-
WS0-CPU1
MELSECNET/H
Remote I/O
station
QJ72LP25-25
-
QJ72LP25G
QJ72BR15
CC-Link IE
Field Network
head module
LJ72GF15-T2 -
CC-Link IE
Field Network
Ethernet
adapter module
NZ2GF-ETB GX Works2
CNC
CNC C70
(Q173NCCPU)
CR750-Q
(Q172DRCPU)
CR751-Q
(Q172DRCPU)
NC Configurator
*1 *2
MELDAS C6/C64 -
Robot
controller
CRnQ-700
(Q172DRCPU)
RT ToolBox2
*3
CRnD-700
CR750-D
CR751-D

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive