MUTOH ValueJet - Starting up

ValueJet 1304 Service manual
5-5 AP-74109 Rev 1.1
5.2.2 Starting Up
To use the self-diagnosis function, you must first call up the self-diagnosis menu on the operation panel.
The self-diagnosis menu is completely independent of the normal operation mode and self-diagnosis display
mode. To call up the self-diagnosis menu, follow the steps below.
1. If the system is in the operation mode or the self-
diagnosis menu mode, press [Power] key to turn
the printer off.
2. While holding down [Setting/value -] key,
[Setting/value +] key and [>] key in the operation
panel simultaneously, press [Power] key.
The system will enter the self-diagnosis mode
and display the self-diagnosis menu.