MUTOH ValueJet User Manual

ValueJet 1304 Service manual
5-45 AP-74109 Rev 1.1
5.7.10 Software Counter Initialization Menu
This menu is used to initialize the software counters such as the waste ink counter.
NOTE
The counters are initialized before delivery. Do not initialize them during maintenance.
The software counters that can be initialized through this menu are as follows.
Pressing the [Enter] key in the operation panel performs the software counter initialization.
Pressing [Cancel] key cancels the initialization.
Table 5-9 Software Counters to be Initialized
Counter Initial
value
Waste ink amount counter
0
Ink consumption counter K
0
Ink consumption counter C
0
Ink consumption counter M
0
Ink consumption counter Y
0
Cumulative print timer
0
User Ink-filling flag
Not filled
Smartchip log
None
Ink Not-filled flag
Not filled
Finish initialization
[Enter] key
Adjustment Menu

MUTOH ValueJet Specifications

General

Technology	Piezo Inkjet
Ink Type	Eco-solvent ink
Print Resolution	Up to 1440 dpi
Resolution	Up to 1440 dpi
Ink Colors	CMYK, White
Media Width	64 inches
Interface	USB, Ethernet
Operating Systems	Windows