ValueJet 1304 Service manual
8-5 AP-74109 Rev 1.1
8.3 Part Life Information
This section shows how to check the life of the service parts.
To know the life of the service parts, check the maintenance counter from the counter display menu in the
maintenance mode.
"6.3.1 Counter Display Menu" p.6-4
Part life information of this printer is shown in the table below.
Table 8-3 List of Parts Life Expectancy
Part Life expectancy Warning
display
How to
restore
Replacement
parts
References
Waste fluid tank Warning at
600,000 times of
counting
(equivalent to
600ml)
Full Waste
Ink Tank
By
pressing
[Enter]
key while
replacing
the counter
to the new
one.
Waste ink box
(Replaced by
users)
-
CR motor 4,700,000 passes Life Times
[CR Motor]
CR motor
initializa-
tion
At the first
warning:
• CR motor
• CR Driven
pulley
(Check the ink
tube and the CR
cable.)
At the next
warning:
• CR cable
besides above
"4.5.1 CR
Motor
Assembly"
p.4-51
"4.5.5
Replacing CR
Driven Pulley
and CR belt"
p.4-58
"4.10.2
Replacing Ink
Tube" p.4-93
"4.10.3
Replacing CR
Tape Wire"
p.4-97
PF motor 20 Km Life Times
[PF Motor]
PF motor
initializa-
tion
Replace as
necessary
"4.4.1
Replacing PF
Motor
Assembly"
p.4-44
Print head 6 × 10
8
(6 thousand
million) dots
Life Times
[Head]
Head unit
initializa-
tion
Replace as
necessary
"4.6.1
Replacing
Print Head"
p.4-61