MUTOH ValueJet - Date & Time Setting

ValueJet 1304 Service manual
7-31 AP-74109 Rev 1.1
7.3.8 Date & Time Setting
Sets date and time of the printer.
These data has been transferred from PC to printer. The setting can be confirmed in the “Time setting” of the
self-diagnosis function.
"5.10 Time Check" p.5-52
NOTE
The date and time information of PC is transferred directly. Check whether the information is correct
or not.
1. Click [Date & Time Install] on the main window.
2. When the “Date & time installation check”
window opens, click [OK].
Transferring will start.
3. When transferring completes and the “Install
completed” window opens, confirm that the
installed date is correct, and click [OK].