MUTOH ValueJet User Manual

ValueJet 1304 Service manual
AP-74109 Rev 1.1 5-10
5.4 Platen Adjustment Menu
In the platen adjustment menu, you can set the temperature of the pre-heater and platen heater to 30 °C.
Parts assembly and adjustment should be done in the condition.
* This item displays platen temperature only.
Fig. 5-1 If the heater temp. does not reach 30°C.
Fig. 5-2 If the heater temp. reach 30°C.
NOTE
If the heater temp. reach 30 °C, buzzer sounds.
[<] key
[<] key
[>] key
[<] key
[>] key
[>] key
Pre-heater
PlatenHeater 1
PlatenHeater 2
[Enter] key
[Cancel] key
[Enter] key
[Enter] key
[Cancel] key
[Cancel] key
[<] key
[<] key
[>] key
[<] key
[>] key
[>] key
Pre-heater
Platen Heater 1
Platen Heater 2
[Enter] key
[Cancel] key
[Enter] key
[Enter] key
[Cancel] key
[Cancel] key

MUTOH ValueJet Specifications

General

Technology	Piezo Inkjet
Ink Type	Eco-solvent ink
Print Resolution	Up to 1440 dpi
Resolution	Up to 1440 dpi
Ink Colors	CMYK, White
Media Width	64 inches
Interface	USB, Ethernet
Operating Systems	Windows