MUTOH ValueJet User Manual

ValueJet 1304 Service manual
AP-74109 Rev 1.1 5-44
5.7.9 HeadWash Menu
This menu is used to purge ink and clean the heads at the end of the manufacturing process and before print
head replacement.
The actual procedure is as follows.
1. Press [Enter] key in the operation panel to determine the Head Cleaning Menu.
2. Remove all ink cartridges.
3. Press [Enter] key in the operation panel to discharge ink.
4. After ink is discharged, install the head cleaning jig.
5. Press [Enter] key in the operation panel to charge shipping liquid.
6. After shipping liquid is charged, remove the head cleaning jig.
Remove cleaning jig and press [Enter] key to discharge
shipping liquid
After shipping liquid is charged
Set cleaning jig and press [Enter] key to charge shipping liquid
Finish Ink Discharge
Remove all cartridges and press [Enter] key to discharge ink

MUTOH ValueJet Specifications

General

Technology	Piezo Inkjet
Ink Type	Eco-solvent ink
Print Resolution	Up to 1440 dpi
Resolution	Up to 1440 dpi
Ink Colors	CMYK, White
Media Width	64 inches
Interface	USB, Ethernet
Operating Systems	Windows