MUTOH ValueJet - Parameter Initialization Menu

ValueJet 1304 Service manual
5-53 AP-74109 Rev 1.1
5.11.1 Parameter Initialization Menu
This menu initializes the adjustment parameters. The parameters that can be initialized through this menu are
as follows.
• Uni-D / Bi-D parameter, wiper, CR motor, PF motor, pump, waste ink
• Initialization of all items
[<] key
[<] key
[>] key
[<] key
[>] key
[>] key
[>] key
[>] key
[<] key
[<] key
[<] key
[<] key
[<] key
[>] key
[>] key
[>] key
[<] key
[Enter]
key
[>] key