ValueJet 1304 Service manual
5-43 AP-74109 Rev 1.1
5.7.8 Test Printing Menu
In this menu, you can print out adjustment patterns for checking various adjustment items.
The actual procedure is as follows.
1. Set media as necessary.
2. After media is set, the machine prints out the following test printings.
• Nozzle check: Prints head nozzle check patterns.
• Nozzle check steps: Prints head nozzle check patterns of lines only.
• Adjustment parameters: Prints setting values for each adjustment item.
• Error history: Evaluates the serious error history.
3. Press the [Enter] key in the operation panel to start the selected test printing.
To Next Page
Loading...
