ValueJet 1304　Service manual
AP-74109 Rev 1.1 2-2
2.1 Introduction
This chapter explains the features, part names, and functions of the printer.
2.2 Features
The features of the printer are explained below.
(1) Fast Print
The new print head adopted on this printer performs fast to print images.
Also, this printer prints up to 1355.5mm (when uni-directional print mode) or 1336.5mm (when bi-directional
print mode) in width.
(2) Variety of Print Media
The height of the print head position can be set high/low, so that this model can print on the media of which
thickness is between 0.08 and 1.00 mm.
(3) Vivid Color Reproduction
For vivid color reproduction, this model has high-capacity (220 ml) 4 color ink cartridges with exclusive
smart IC chip on it. With the IC chip, you can manage the ink level of the cartridges and can get better
productivity.
Also, with the variable dot method, richer color expression can be enhanced.
(4) Multi-Heater System
The media-heating system which have been equipped to PJ series is changed to match the solvent ink. There
are 3 heaters on Pre / Platen / After positions and improved the ink flexibility and drying property.
(5) Effective Utilization of Media
The JOG function is featured, which allows to set random print start positions. Printed media can be reprinted
and blank areas on the media can be put to effective use.
To Next Page
Loading...
Need help?
General
