ValueJet 1304 Service manual
AP-74109 Rev 1.1 5-52
5.10 Time Check
Confirms the date and time controlled by RTC (Real Time Clock) on the MAIN board assembly.
You cannot set the date and time using this menu. In that case, use the time setting function of
“MUTOH Maintenance Engineer Assistant”.
"7.3.8 Date & Time Setting" p.7-31
5.11 Parameter Menu
In this menu, you can modify the set values of various adjustment items (adjustment parameters).
The parameter menu includes the following items.
Table 5-12 Diagnosis Items in Parameter Menu
Diagnosis item Contents Reference
Initialization Initializes the adjustment parameters. "5.11.1 Parameter
Initialization Menu"
p.5-53
Update Updates the adjustment parameters. "5.11.2 Parameter
Update Menu" p.5-56
To Next Page
Loading...
