ValueJet 1304 Service manual
1-11 AP-74109 Rev 1.1
1.5 Operation Labels
This chapter describes the operation labels including their types and attaching positions.
The operation labels are attached on the product to provide the brief instructions for the particularly important
operations. Learn the instructions and the attaching positions before operation.
1.5.1 Handling the Operation Labels
Make sure to note the following when handling the operation labels.
• Make sure that all operation labels can be recognized. If text or illustrations cannot be seen clearly,
clean or replace the label.
• When cleaning operation labels, use a cloth with water or neutral detergent. Do not use a solvent
or gasoline.
• If an operation label is damaged, lost, or cannot be recognized, replace the label.
No. Warning label type
1
(Catching caution)
To Next Page
Loading...
