MUTOH ValueJet - Printing Problems

ValueJet 1304 Service manual
9-41 AP-74109 Rev 1.1
9.3.3 Printing Problems
Table 9-9 Symptoms, Check Items and Actions for Printing Problems
No. Symptom Check item Action Reference
1 Machine cannot print
sequentially.
1. printer driver may be
defective.
Update printer driver. "7.3.5
Firmware
Installation"
p.7-21
2. Program ROM may be
defective.
Update firmware. "7.3.5
Firmware
Installation"
p.7-21
3. Main board assembly
may be damaged.
Replace main board
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-29
2 Media feed after
printing is excessive.
1. Is P_REAR sensor
assembly judged as
normal when checked
through "Test7: Rear"
of self-diagnosis
function?
• Reconnect main board
assembly connector J42.
• Replace P_REAR sensor
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-29
"4.9.2
Replacing
P_REAR
Sensor
Assembly"
p.4-90
2. Program ROM may be
defective.
Update firmware. "7.3.5
Firmware
Installation"
p.7-21
3. Main board assembly
may be damaged.
Replace main board
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-29