MUTOH ValueJet - Uni-D; Bi-D Adjustment High

ValueJet 1304 Service manual
AP-74109 Rev 1.1 5-24
HeadWash Cleans the tubes and heads using cleaning liquid. "5.7.9 HeadWash
Menu" p.5-44
Software counter
initialization
Clears various software counters. "5.7.10 Software
Counter Initialization
Menu" p.5-45
Feed amount check Used to check the media feed amount per band. "5.7.11 Feed Pitch
Check Menu" p.5-46
Solid print check Performs solid nozzle print check (color selection, nozzle
selection and print direction selection are available).
"5.7.12 Solid Print
Menu" p.5-47
Table 5-4 Diagnosis Items in Adjustment Menu (Continued)
Diagnosis item Contents Reference
[<] key
[<] key
[>] key
[<] key
[<] key
[<] key
[>] key
[<] key
[>] key
[>] key
[>] key
[>] key
[<] key
[>] key
[<] key
[>] key
[>] key
[<] key
[<] key
[<] key
[>] key
[>] key
Nozzle Check Menu
CR Return Position Adjustment Menu
Check Skew Menu
Head Slant Menu
Voltage Adjustment Menu
Uni-D/Bi-D Low Adjustment Menu
Side Margin Adjustment Menu
Software Counter Initialization Menu
Feed Pitch Check Menu
[<] key
[Enter] key
[Cancel] key
Uni-D/Bi-D High Adjustment Menu
Test Print Menu
Head Wash Menu
[>] key
Solid Print Menu
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Enter] key
[Cancel] key