ValueJet 1304 Service manual
AP-74109 Rev 1.1 7-30
2. When the “Select of Install File” window opens,
select the file to be transferred and click [Open].
* Click [Cancel] to return to the main window.
3. In the “Sub Controller Install check” window,
click [OK] to start sending.
* Click [Cancel] to return to the main window.
4. While receiving parameters, “Transferring”
window appears.
* Click [Cancel] to abort transferring.
5. When sending completes and the “Send
completed” window opens, click [OK].
To Next Page
Loading...
