MUTOH ValueJet - Page 343

ValueJet 1304 Service manual
9-29 AP-74109 Rev 1.1
28 Transfer not
ready
Transfer is not
available.
Check if LED display
on operation panel is in
waiting status of board
manager mode.
Press any button on
operation panel to make
the panel display
waiting state. Then,
reinstall the software.
"7.3
Working with
MUTOH
Maintenance
Engineer
Assistant"
p.7-8
"7.4
Working with
MUTOH
Service
Assistance"
p.3-30
Table 9-6 Error Messages During File Transmission (Continued)
No. Message Event/
symptom
Check item Action Reference