6.2.1 Starting Up 352
6.2 Operations in Maintenance Mode 2 VJ628XE-M-00
(2-a)Starting Up Maintenance Mode 2
Before using the maintenance mode 2, make sure that the maintenance menu is
displayed on Jig panel.
To run the maintenance mode 2 menu, switch the display to the normal operation
status or setup menu display status.
1 While holding down [<] key, [Setting/Value-
] key and [>] key on Jig panel
simultaneously, press [Power] key.
The Jig panel displays the maintenance
mode 2 menu.
To Next Page