ACLs
180
Managed Switches
A screen similar to the following displays.
b. Under Binding Configuration, specify the following:
• In the ACL ID list, select 101.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click the gray box under port 44. A check mark displays in the box.
e. Click Apply to save the settings.
12. Apply ACL 102 to port 44.
a. Select Security > ACL > Advanced > IP Binding Configuration.
A screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• In the ACL ID list, select 102.
• In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display.
d. Click the gray box under port 44.
A check mark displays in the box.
e. Click Apply to save the settings.
To Next Page
Loading...
