NETGEAR M4200

ACLs
181
Managed Switches
Configuring the Switch B
1. Create VLAN 40 with IP address 192.168.40.1/24.
a. Select Routing > VLAN > VLAN Routing Wizard.
A screen similar to the following displays.
b. Enter the following information:
• In the Vlan ID field, enter 40.
• In the IP Address field, enter 192.168.40.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays.
The U specifies that the egress packet is untagged for the port.
e. Click Apply to save VLAN 40.
2. Create VLAN 50 with IP address 192.168.50.1/24:
a. Select Routing > VLAN > VLAN Routing Wizard.
A screen similar to the following displays.
b. Enter the following information:
• In the Vlan ID field, enter 50.
• In the IP Address field, enter 192.168.50.1.
• In the Network Mask field, enter 255.255.255.0.