NETGEAR M4200

ACLs
218
Managed Switches
A screen similar to the following displays.
b. In the ACL Name list, select ipv6-acl.
c. Click Add.
A screen similar to the following displays.
d. In the Rule ID field, enter 1.
e. For Action, select the Permit radio button.
f. In the Source Prefix field, enter 2001:DB8:C0AB:AC11::.
g. In the Source Prefix Length field, enter 64.
h. In the Destination Prefix field, enter 2001:DB8:C0AB:AC14::.
i. In the Destination Prefix Length field, enter 64.
j. Click Apply.
3. Add Rule 2.
a. Select Security > ACL > Advanced > IPv6 Rules.