DiffServ
237
Managed Switches
A screen similar to the following displays.
e. Under Diffserv Class Configuration, enter the following information:
• In the Source IP Address field, enter 172.16.20.0.
• In the Source Mask field, enter 255.255.255.0.
f. Click Apply.
4. Create the class test_dept:
a. Select QoS > DiffServ > Advanced >Class Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the Class Name field, enter test_dept.
• In the Class Type list, select All.
c. Click Add to create a new class test_dept.
d. Click test_dept to configure this class.
To Next Page
Loading...
