DiffServ
238
Managed Switches
A screen similar to the following displays.
e. Under Diffserv Class Configuration, enter the following information:
• In the Source IP Address field, enter 172.16.30.0.
• In the Source Mask field, enter 255.255.255.0.
f. Click Apply.
5. Create class development_dept.
a. Select QoS > DiffServ > Advanced > Class Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the Class Name field, enter development_dept.
• In the Class Type list, select All.
c. Click the Add to create a new class development_dept.
d. Click development_dept to configure this class.
To Next Page
Loading...
