MVR
303
Managed Switches
A screen similar to the following displays.
b. Under MVR Interface Configuration, scroll down and select the Interface 0/9 check
box.
c. Enter the following information:
• In the Admin Mode list, select Enable.
• In the Type list, select source.
d. Click Apply to save the settings.
6. After port 1 receives an IGMP report for multicast group 224.1.2.3, it is added into MVR
group 224.1.2.3.
a. Select Switching > MVR > Advanced > MVR Group Membership.
A screen similar to the following displays.
To Next Page
Loading...
