NETGEAR M4200

Security Management
351
Managed Switches
A screen similar to the following displays.
3. Configure the port through which the DHCP server is reached as trusted.
Here interface 1/0/1 is trusted.
a. Select Security > Control > DHCP Snooping Interface Configuration.
A screen similar to the following displays.
b. Select Interface 1/0/1 check box.
c. For interface 1/0/1, in the Trust Mode field, select Enable.
d. Click Apply.
a. Select Security > Control > DHCP Snooping Interface Configuration.
A screen similar to the following displays.
4. View the DHCP Snooping Binding table.
Select Security > Control > DHCP Snooping Binding Configuration.