NETGEAR M4200

Security Management
352
Managed Switches
A screen similar to the following displays.
5. Enable IP source guard in the interface 1/0/2.
a. Select Security > Control > IP Source Guard > Interface Configuration.
b. Select the Interface 1/0/2 check box.
c. For the IPSG mode, select Enable.
d. Click Apply.
A screen similar to the following displays.
6. Set up IP source guard static binding.
a. Select Security > Control > IP Source Guard > Binding Configuration.
b. Select the Interface 1/0/2 check box.
c. In the MAC Address field, enter 00:05:05:05:05:05.
d. In the VLAN ID field, enter 1.
e. In the IP Address field, enter 192.168.10.80.
f. Click Add.
A screen similar to the following displays.