PIM
566
Managed Switches
A screen similar to the following displays.
b. For PIM Protocol Type, select the PIM-DM radio button.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
10. Enable PIM-DM on interfaces 1/0/1,1/0/9, and 1/0/13.
a. Select Routing > Multicast > PIM > Interface Configuration.
A screen similar to the following displays.
b. Under PIM Interface Configuration, scroll down and select the 1/0/1, 1/0/9, and
1/0/13 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
To Next Page
Loading...
