PIM
602
Managed Switches
A screen similar to the following displays.
b. In the Interface list, select 1/0/22.
c. In the Hash Mask Length field, enter 30.
d. In the Priority field, enter 3.
e. Click Apply.
13. Enable IGMP globally.
a. Select Routing > Multicast > IGMP > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
14. Enable IGMP on interface 1/0/24.
a. Select Routing > Multicast > IGMP > Interface Configuration.
To Next Page
Loading...
