MLD
632
Managed Switches
A screen similar to the following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply.
3. Configure 1/0/21 and 1/0/24 as IPv6 routing ports.
a. Select Routing > IPv6 > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/21 and 1/0/24 check boxes.
c. Enter the following information:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
• In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
4. Assign an IPv6 address to 1/0/21.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.
To Next Page
Loading...
