4. Press or to select the type of paper, and then press the OK button.
5. Press or to select Cutting Mode, and then press the OK button.
6. Press or to select Manual, and then press the OK button.
7. Starts printing.
The printer stops advancing the paper after printing.
8. Press the Feed button.
Roll paper is fed to the specified cut position and then automatically stopped.
9.
Cut the roll paper manually with scissors or the like.
10. Press the OK button.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specified position)
To Next Page
Loading...
