Oce PlotWave 900 User Manual

2.
Press the left selection key to shift the focus to the Media option. A shadow effect is used
to indicate that the focus is set to this option.
3.
Use the arrow keys to select the roll for which you have just loaded new media.
4.
Press the right selection key to activate the 'Mat.' (Material) option. The dotted line
around the current selection changes into a solid line and the small selection triangles
next to the specified size are no longer dimmed.
5.
Use the arrow keys to select the media material for the media you just loaded.
6.
Press the “Online” key to put the printer online again. The printer now knows which
media is used for the specified roll.
Set a media size indication
1.
Press the “Online” key on the printer operator panel to put the printer offline. The message
“Offline” is displayed in the status window.
2.
Press the left selection key to shift the focus to the Media option. A shadow effect is used
to indicate that the focus is set to this option.
3.
Use the arrow keys to select the roll for which you have just loaded new media.
4.
Press the right selection key to activate the ‘Size’ option. The dotted line around the
current selection changes into a solid line and the small selection triangles next to the
specified type are no longer dimmed.
5.
Use the arrow keys to select the 'Size' option for the specified roll. The printer shows
both DIN and ANSI sizes.
6.
Press the “Online” key to put the printer online again. The printer now knows the size
of the specified roll.
Chapter 2 - Get to know the Océ PlotWave 900 system38
Media types, material and sizes on the printer

Oce PlotWave 900 Specifications