Oce PlotWave 900 User Manual

#
DescriptionSetting
When 'Enabled', the scanner will lock after startup.'Scanner locking: at
startup'
When 'Enabled', the scanner will lock when the scanner operator
panel timeout expires.
'Scanner locking: at
panel time-out'
Scanner locking and unlocking can be done from any host
(workstation) or a single host (workstation) only on the network.
When set to 'From any host', accounting fields can be filled in
from any host to unlock the scanner.
When set to 'From single host', a single host can be specified
from which the scanner can be unlocked.
'Scanner unlock-
ing: location'
The hostname or IP-address from which accounting fields can
be entered to unlock the scanner.
Only valid when 'Scanner unlocking: location' has value 'From
single host'.
'Scanner unlocking
location: single
host'
When set to 'Everyone', no login is needed to enter accounting
fields to unlock the scanner.
When set to 'Login needed', only a Key operator or Power User
is allowed to perform this action.
'Scanner unlock-
ing: access'
Accounting information
1.
For detailed Accounting information: See: ‘An overview of Océ Account Center’ on page
348
Chapter 3 - Define your workflow with Océ Express WebTools58
The Scanner accounting tab

Oce PlotWave 900 Specifications