Enable or disable the failsafe option
1.
Open Océ Express WebTools and log in as 'System administrator'.
2.
Open the 'Configuration' - 'Connectivity' tab.
3.
Go to the 'IPsec generic' bar.
4.
Click on Edit in the upper right-hand corner of the section.
5.
Choose the setting for the 'Failsafe option'; select either 'Disabled' or 'Enabled'.
Note:
'When enabled, HTTP communication remains possible with all hosts, with no encryp-
tion, even when IPsec is enabled. All functionality of Express WebTools, including job
submission, uses HTTP. Once IPsec is configured correctly and working satisfactorily,
this option can be disabled.'
Chapter 3 - Define your workflow with Océ Express WebTools78
Enable IPSec
To Next Page
Loading...
