OmniSwitch os6900 User Manual

Configuring RIP Configuring Redistribution
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 19-17
Route Map Redistribution Example
The following example configures the redistribution of OSPF routes into a RIP network using a route map
(ospf-to-rip) to filter specific routes:
-> ip route-map ospf-to-rip sequence-number 10 action deny
-> ip route-map ospf-to-rip sequence-number 10 match tag 5
-> ip route-map ospf-to-rip sequence-number 10 match route-type external type2
-> ip route-map ospf-to-rip sequence-number 20 action permit
-> ip route-map ospf-to-rip sequence-number 20 match ipv4-interface intf_ospf
-> ip route-map ospf-to-rip sequence-number 20 set metric 255
-> ip route-map ospf-to-rip sequence-number 30 action permit
-> ip route-map ospf-to-rip sequence-number 30 set tag 8
-> ipv6 redist ospf into rip route-map ospf-to-rip
The resulting ospf-to-rip route map redistribution configuration does the following:
• Denies the redistribution of Type 2 external OSPF routes with a tag set to five.
• Redistributes into RIP all routes learned on the intf_ospf interface and sets the metric for such routes to
255.
• Redistributes into RIP all other routes (those not processed by sequence 10 or 20) and sets the tag for
such routes to eight.

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English