UNP Overview Configuring Universal Network Profiles
page 27-20 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
2
In a MCLAG configuration, after the UNP dynamic VLAN is created in the local chassis, a request is
sent to the peer chassis to create the same VLAN. In this case, the remote chassis does the following:
• If there is no profile with this advertised VLAN, then the request to create the VLAN is dropped.
• If there is a profile with this advertised VLAN but the VLAN doesn't exist, then the VLAN is created
as a UNP dynamic VLAN.
• If there is a profile with this advertised VLAN and the VLAN type is MVRP, the VLAN is converted
to a UNP dynamic VLAN.
3
In a MCLAG configuration, after the UNP dynamic profile is created in the local chassis, a request is
sent to the peer chassis to also create a dynamic profile. In this case, the remote chassis does the following:
• If a profile already exists, then one of the following actions occurs:
> If the profile VLAN is an MVRP VLAN, the VLAN is converted to UNP dynamic VLAN.
> If the profile VLAN does not exist, then a UNP dynamic VLAN is created.
• If a profile doesn't exist, then a UNP dynamic profile is created and one of the following actions
occurs:
> If the profile VLAN is an MVRP VLAN, the VLAN is converted to UNP dynamic VLAN.
> If the profile VLAN does not exist, then a UNP dynamic VLAN is created.
To Next Page
Loading...
Need help?
General