Index
Index-6 OmniSwitch AOS 7 Network Configuration Guide June 2013
verify information about 25-52
policies configured via PolicyView 25-72
policy action 802.1p command 25-9
policy action command 25-43
policy action map command 25-60
policy action redirect linkagg command 25-76
policy action redirect port command 25-76, 25-77
policy actions
see actions
Policy Based Routing 25-79
policy condition command 25-43
policy conditions
see conditions
policy MAC groups 25-57
policy map group command 25-60
policy map groups
application example 25-60
policy network group command 25-53
policy network groups 25-54
switch default group 25-37, 25-54
policy port group command 25-53
policy port groups 25-58
policy rule command 25-43
policy server command 26-2, 26-4
policy server flush command 26-6
compared to
qos flush command 26-7
policy server load command 26-6
policy servers
defaults 26-2
downloading policies 26-6
installing 26-3
SSL 26-6
policy service group command 25-53
policy service groups 25-56
policy services 25-55
PolicyView
LDAP policy servers 26-1
Port Mapping 30-1
application examples 30-2, 30-6
defaults 30-2
specifications 30-2
port mapping command 30-2
Port Mapping Session
creating and deleting 30-3
enabling and disabling 30-4
port mirroring 32-15, 36-2
application examples 32-4
defaults 32-3
direction 32-21
disabling mirroring status 32-20
displaying status 32-22
enabling or disabling mirroring status 32-20
N-to-1 port mirroring 32-19
specifications 32-3
unblocking ports 32-20
port mirroring command 32-21
port mirroring session
creating 32-19
deleting 32-22
enabling/disabling 32-21
port mirroring source command 32-6
port mirroring source destination command 32-19, 32-20,
32-21
port monitoring
application examples 32-6, 32-9
configuring 32-25, 32-30, 32-31
creating a data file 32-26
defaults 32-5, 32-7
deleting a session 32-25, 32-33
direction 32-27
disabling a session 32-25
displaying status and data 32-28, 32-31, 32-33
enabling a session 32-25
file overwriting 32-27
file size 32-26
overview 32-24, 32-29
pausing a session 32-26
resuming a session 32-26
session persistence 32-26
specifications 32-5, 32-7
port monitoring command 32-25, 32-26
port monitoring source command 32-25, 32-26, 32-27,
32-30
ports
displaying QoS information about 25-9
Spanning Tree parameters 6-33
VLAN assignment 4-7
port-security command 31-11
port-security shutdown command 31-12
Precedence
Configured rule order 25-49
Precedence value 25-49
precedence
for policies 25-49
Q
QoS
application examples 25-43, 25-74
ASCII-file-only syntax 16-9, 25-44
configuration overview 25-38
defaults 25-34
enabled/disabled 25-39
interaction with other features 25-30
overview 25-4
quick steps for creating policies 25-43
Server Load Balancing 23-13
Specifications 25-3
traffic prioritization 25-74
qos apply command 25-71
global configuration 25-71
policy and port configuration 25-71
qos clear log command 25-42
qos command 25-39
qos flush command 25-72
compared to
policy server flush command 26-7
qos forward log command 25-40
QoS log
To Next Page
Loading...
Need help?
General