Index
Index-8 OmniSwitch AOS 7 Network Configuration Guide June 2013
disabling servers 23-18
displaying 23-22
distribution algorithms 23-9
enabling 23-11
enabling clusters 23-17
enabling servers 23-17
ping period 23-15
ping retries 23-16
ping timeout 23-15
QoS 23-13
relative server weight 23-16
server health monitoring 23-10
servers 23-14, 23-17
specifications 23-2
weighted round robin distribution algorithm 23-9
Server Load Balancing probes 23-18
clusters 23-19
configuring 23-18
deleting 23-18
expected status 23-21
modifying 23-19
password 23-20
probe expect 23-21
probe send 23-21
retries 23-20
servers 23-19
TCP/UDP port 23-20
timeout 23-19
URL 23-20
user name 23-20
severity level
see switch logging
show arp command 15-13
show arp filter command 15-15, 15-27
show health command 32-46
show health interval command 32-45
show health threshold command 32-14, 32-44
show icmp control command 15-31
show icmp statistics command 15-31
show ip config command 15-17, 15-23
show ip interface command 15-9
show ip redist command 19-16
show ip rip command 19-7
show ip rip interface command 19-7
show ip route command 15-11, 17-19
show ip route-map command 19-13
show ipv6 interface command 17-15
show linkagg command 7-11
show linkagg port command 7-11
show lldp remote-system command 13-3
show lldp statistics command 13-3
show log swlog command 34-12
show mac-address-table port-mac command 5-16
show policy rule command 23-13
show policy server long command 26-6
show port mirroring status command 32-22
show port monitoring file command 32-28
show port-security command 31-3
show port-security shutdown command 31-4
show qos log command 25-41
show rmon events command 32-37
show rmon probes command 32-12, 32-37
show tcp ports command 15-32
show tcp statistics command 15-32
show udld configuration command 2-3
show udld statistics port command 2-3
show udp ports command 15-33
show udp statistics command 15-33
show vlan svlan command 9-25, 10-38, 12-15, 14-16, 33-26
show vlan svlan port-binding command 12-15
show vlan svlan port-config command 9-25, 10-38, 12-15,
14-16, 33-26
SLB
see Server Load Balancing
SNMP
attributes for LDAP authentication servers 29-21
source learning 3-1
defaults 3-2
MAC address table 3-1, 3-3
source learning time limit 31-12
Spanning Tree
specifications 6-3, 11-2
Spanning Tree Algorithm and Protocol 6-1, 11-1
1x1 operating mode 4-9, 6-20, 6-22
application examples 6-10, 6-44
bridge ID 6-8, 6-27
Bridge Protocol Data Units 6-8, 6-28, 6-29
bridged ports 6-33
designated bridge 6-6
flat operating mode 4-9, 6-20, 6-21
path cost 6-37
port connection types 6-41
Port ID 6-8
port ID 6-36
port path cost 6-6
port roles 6-6
port states 6-7, 6-40
root bridge 6-6, 6-28, 6-29
root path cost 6-6
topology 6-6, 6-11
Topology Change Notification 6-9
Spanning Tree Bridge
defaults 6-4, 11-3
Spanning Tree bridge parameters
802.1D standard protocol 6-27
802.1s multiple spanning tree protocol 6-27
802.1w rapid reconfiguration protocol 6-27
automatic VLAN containment 6-31
forward delay time 6-29
hello time 6-28
maximum age time 6-29
priority 6-27
Spanning Tree Port
defaults 6-4
Spanning Tree port parameters 6-33
connection type 6-41
link aggregate ports 6-35, 6-36, 6-38, 6-40, 6-42
mode 6-40