Orion A10E - Figure 3-6 DHCP Client Networking; Checking Configurations; Configuring DHCP Clients Application

Orion Networks
A10E/A28E/A28F Configuration Guide
3 IP services
Orion Networks
85
3.4.7 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show ip dhcp client
Show DHCP client configuration.
3.4.8 Configuring DHCP clients application
Networking requirements
As shown in Figure 3-6, the Switch is used as DHCP client, the host name is alpha-a28e. The
DHCP server should assign IP address to SNMP interface of the Switch and make NMS
platform manage the Switch.
Figure 3-6 DHCP client networking
Configuration steps
Step 1 Configure DHCP client information.
Alpha-A28E#config
Alpha-A28E(config)#interface ip 0
Alpha-A28E(config-ip)#ip dhcp client hostname alpha-a28e
Step 2 Configure to apply for IP address by DHCP.
Alpha-A28E(config-ip)#ip address dhcp 1 server-ip 192.168.1.1