Orion A10E - Command Line Help Message

Orion Networks
A10E/A28E/A28F Configuration Guide
1 Basic configurations
Orion Networks
10
Shortcut
Description
Ctrl+A
Move the cursor to the head of line.
Ctrl+C
Break off some running operation, such as ping, traceroute
and so on.
Ctrl+D or Delete
Delete the cursor location characters
Ctrl+E
Move the cursor to the end of line.
Ctrl+K
Delete all characters behind the cursor (including cursor
location).
Ctrl+X
Delete all characters before the cursor (except cursor
location).
Ctrl+Z
Return to privileged EXEC mode from other modes (except
user EXEC mode).
Space or y
When the terminal printing command line information
exceeds the screen, continue to show the information in next
screen.
Enter
When the terminal printing command line information
exceeds the screen, continue to show the information in next
line.
1.2.5 Command line help message
Complete help
You can get complete help in the below three conditions:

Click "?" in any command mode to get all commands and their brief description under
the command view.
Alpha-A28E>?
The command output is as below.
clear Clear screen
enable Turn on privileged mode command
exit Exit current mode and down to previous mode
help Message about help
history Most recent historical command
language Language of help message
list List command
quit Exit current mode and down to previous mode
terminal Configure terminal
test Test command .